Seta Copper Corrosion Block Bath – 11308-0

A precision, processor controlled, block heater bath. Supplied with four test wells and designed to take copper corrosion test tubes. The heater has a temperature range of ambient to 200 °C.

The heater is equipped with a 1 to 999 minute countdown timer with buzzer, a temperature deviation alarm that you can set from 0.5 to 10 °C to able deviation and a delay start stop feature that allows the heater to be turned on or off after a predetermined time interval.

You can calibrate the heater over a wide temperature range.

Methods

ASTM D130, ASTM D4814, IP 154, BS EN ISO 2160 & BS 2000-154 & ISO 216

DOWNLOAD PRODUCT BROCHURE

Features

Dry heating for up to four test samples
Accommodates four 25 mm OD test tubes
Rapid heat up time
±0.1 °C accuracy at 150 °C
Over temperature cut off
Fault warning Indicator
Function timer for delayed start / stop (1 min – 72 hours).

Details

Supplied with;
Block
Block extractor tool
Mains lead
Instruction manual

Specifications

Temperature Range	Ambient to 200 °C
Temperature Stability	±0.1 °C
No of Test Stations	4
Heater Power	3 kW
Voltage	110/120 V, 50/60 Hz or 220/240 V, 50/60 Hz
Size (HxWxD)	12 cm x 20 cm x 28 cm
Weight	15 kg (Including block)
Timer Range	1 to 999 mins