Seta Silver and Copper Corrosion Bath – 11405-0
The Seta Silver and Copper Corrosion Bath is a bench top, stainless steel water or oil bath. Digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 150 °C, the bath is used to determine the corrosive effects of fuels, lubricants and other hydrocarbon products on copper and silver.
The bath features 6 test stations, each with a lid and hook for suspending a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11422-0). You can use any combination of copper corrosion vessels and test tube supports for maximum test flexibility.
Methods
ASTM D130, ASTM D4048, ASTM D7667, ASTM D7671, IP 112, IP 154, IP 611, BS EN ISO 2160 & BS 2000-154 & ISO 2160, DIN EN ISO 2160, ISO 2160
Features
- Ambient +5 to 150 °C
- 19 litre bath
- 6 test stations
- Programmable digital temperature controller
- Digital timer
- Over temperature cut out and liquid level float switch
- Maximum liquid level outlet fitting
- Small footprint
Details
Ease of use:
All functions on the Silver and Copper Corrosion bath are accessed via the dial and indicator icons are shown on the colour display of the thermostir.
Enhanced safety:
Safety features include a float-operated low liquid level cut out. Users are made aware if the level of liquid in the bath falls below the allowable level with a warning display on the thermostir screen and an audible alarm, the heater automatically switches off.
An adjustable over-temperature cut out protects the instrument from overheating. If the bath temperature exceeds the over-temperature cut out temperature, again a warning displays on the thermostir screen, an audible alarm sounds and the heater automatically switches off.
Calibration and verification:
Calibration of the Corrosion Bath can be performed in the field, eliminating the costs and time associated with sending the instrument to a service centre.
Service and maintenance:
The rugged design ensures minimal operational maintenance is needed.
Supplied with: 6 x lids, mains lead, instruction manual.
Specifications
| Temperature Range | 20 to 150 °C |
| Temperature Stability | ±0.1 °C |
| Bath fluid | Water or Oil |
| Bath capacity | 19 litres |
| Apertures | 6 x 52 mm |
| Heater power | 1500 W |
| Voltage | 110/120 V, 50/60 Hz 200/220 V, 50/60 Hz |
| Size (HxWxD) | 51 x 23 x 46 cm |
| Weight | 13.3 kg |
Spares and Accessories
