Setaflash Series 3 Open Cup Flash Point Tester – 31000-0
The Setaflash Series 3 Open Cup Flash Point Tester is an easy to use instrument for flash/no flash, finite determinations or sustained combustion tests. Similar in design to the 30000-3, the instrument allows testing at any specific temperature within a range of ambient to 300 °C.
Methods
ASTM D4206, IP 602, BS 3900-A11, CFR 49-173.120 Appendix H, CLP Regulations EC No 1272/2008, IATA Dangerous Goods Regs. Section 3.3.4, ISO 9038, UN Class 3 Test L2
Features
- Ambient to 300 °C
- Flash point test in 1 minute
- Small sample size – 2 ml
- Audible and on-screen prompts
- Portable operation
- Simple calibration
Details
A manually operated flame sweeping arm is fitted to the cup of the Series 3 flash point tester and gas is supplied from the integral tank via the control valve. The flash or sustained combustion characteristics of the sample are observed visually by passing the test flame over the sample.
Supplied with: 2 ml syringe, igniter, test flame height gauge, mains lead, and instruction manual.
Specifications
| Temperature range | Ambient to 300 °C |
| Sample Size | 2 ml |
| Test time | 1 minute for flash points up to 100 °C 2 minutes for flash points above 100 °C |
| Temperature measurement Default values | 0.5 °C resolution 0.5 °C accuracy |
| Cup Material | Blackened Aluminium |
| Voltage | 110/120 V or 220/240 V, 50/60 Hz (switchable) or 12 V using optional power supply |
| Size (HxWxD) | 26 x 28 x 26 cm |
| Weight | 5 kg |
